The Rs-485 to CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal.
High efficiency, power & signal double isolated product. It can convert RS-232/S-485/RS-422 system fit with CAN Bus system. Then we can use CAN realize RS-485 signal to further transmission.
Support Can Bus 2.0A/B protocol
Can set the RS-485 and CAN Bus baud rate and communication format by software
5V-30V support power, in-build power isolation module, isolation voltage DC2500V.
RS-485 support standard 300~115.2K bps baud rate, 15KV ESD protection.
CAN data cable transient interference suppression, communication baud rate can be 1Mbps
Power and data flow have indicator lamp, in case of fault treatment
Special data transmission will delay 1ms(serial port baud rate 9.6kbps, CAN Bus baud rate 100KBPS )
Industrial din rail and cover
ELECTRICAL:
- Isolation 3000Vsm
- Lightning/Surge Protection 1~2 lightning strikes
- ESD Protection 15KV
- CAN BUS Rs-485 Connector Type Terminal
- Data Rate DC -1Mbps(canbus), 0-115.2kbps(Rs-485 Extended
- Distance 10Km(canbus), 1.2Km(Rs-485)
GENERAL:
- Operating Temperature -40 ~ 70C / -40 ~ +158F
- Operating Humidity 0 ~ 95% non-condensing
- Mean Time Between Failure (MTBF) > 70, 000hrs
- Power Supply Input Voltage 9~18V
- DC Power Supply Output Voltage 5V DC
- Dimensions (H × W× D) 80mm× 60mm× 23mm/3.15” × 2.36” × 0.91”
Appllication:
Physical layer implement.Mainly used to prolong RS485 data transmission distance, must be used in pairs.