CAN to Ethernet Converter(BUE-CANET-I & BUE-CANET-II)

1.1 Product Overview

Our CAN Bus to Ethernet(TCP/IP)  module converter  is  an intelligent  CAN bus communication  interface  that  is compatible  with  TCP/IP protocol and supports one or two CAN channel. Using this module will enable PC to connect to CAN-bus network via USB bus, forming the CAN-bus network control nodes for the data processing and data collection for the CAN-bus networks such as bus laboratory, industrial control, intelligent residential zone, auto electronics network, and etc.

CAN Bus to Ethernet module comes with an electrical isolation module, which could be used to avoid the damage caused by the ground loop and enhance the system reliability when working under a tough environment.

CAN Bus to Ethernet module  can  use  our  Tester  software

provided  by us  to  directly finish  CAN  Bus message sending, and receiving.

1.2 Parameters

• Application as Ethernet based interface to the CAN bus Microcontroller STR912FAW44X6(ARM9 Based) Ethernet 10M/100M
• Baud rates up to 1MB & 7500 frames.
• CAN 2.0A (11-bit ID standard frames) and 2.0B (29-bit ID extended frames) Config software available through the Ethernet interface.
• Comply with ISO-11898.
• Examples of Visual C++, C++Builder are available; Max data flow 6000PS (extend frame)
• Operating temperature: -20 to +70
• Physical size: (length) 105mm * (width) 84mm * (height) 28mm. Powered by DC (7 to 40V)
• Can Bus port number: 1 or 2

1.3 Typical applications

• CAN-bus network diagnosis and test
• Auto electronic applications
• Electric power communication network
• Industrial control devices
• High-speed and large data communications